KIT QUENCH-L0 Bundle Test

QUENCH-L0 was the commissioning test for the QUENCH-L1 bundle experiment with Zircaloy-4 cladding tubes, defined as reference test for the QUENCH-LOCA test series. The overall objective of this bundle test series is the investigation of ballooning, burst and secondary hydrogen uptake of the cladding under representative design-based accident conditions, as well as to check the embrittlement criteria by means of detailed mechanical post-test investigations.

Last Update: 2024-11-27T15:48:59.545699

Dataset Info

KIT QUENCH-L0 Bundle Test

Abonnés: 0

Licence

IAEA Terms of Use

Openness

0 out of 5

Données et ressources

QL0_data_set_online_meas.xlsxXLSX
Start: 22.07.2010 11:30:40 (= -1405 s) Recording rate: 5.0 Hz
Explorer
- Aperçu
- Télécharger
QL0_mass_spectr.xlsxXLSX
Explorer
- Aperçu
- Télécharger
Report_KIT-SR_7571__Commissioning_QUENCH-L0__Zry4.pdfPDF
Explorer
- Aperçu
- Télécharger
QL0_instrumentation.pdfPDF
Explorer
- Aperçu
- Télécharger

Champ	Valeur
Source
Version	1.0
Author(s)
Mainteneur
Courriel du mainteneur
Update Frequency	Ad-hoc
Preferred Form of Citation	INTERNATIONAL ATOMIC ENERGY AGENCY, [Title]. IN: IAEA Data Platform [online], IAEA, Vienna [YEAR]

Disclaimer

The IAEA makes no warranties, either expressed or implied, concerning the accuracy, completeness, reliability, or suitability of the information. The mention of names of specific companies or equipment does not imply any intention to infringe proprietary rights, nor should it be construed as an endorsement or recommendation on the part of the IAEA.