Studsvik LOCA test (NRC-192)

A series of six out-of-reactor LOCA simulation tests were performed from 2011 to 2012 by Studsvik Nuclear AB, Sweden, under contract with the U.S. Nuclear Regulatory Commission (U.S. NRC). The tests were done on fuel pellets that had been sampled from full-length elements with average burnups ranging from 55 to 72 MWd/kgU. All the fuel elements were of Westinghouse PWR design, with UO2 fuel pellets and first generation ZIRLO (Zr-1.03Nb-0.98Sn by wt%) cladding. The tests were designed to assess the mechanical performance of ballooned and ruptured high burnup fuel rods under typical LWR LOCA conditions; useful information on fuel fragmentation, axial relocation and dispersal were achieved from these tests.

Last Update: November 27, 2024, 3:49 PM (UTC+00:00)

Dataset Info

Studsvik LOCA test (NRC-192)

Followers: 0

License

IAEA Terms of Use

Openness

0 out of 5

Data and Resources

Field	Value
Source
Version	1.0
Author(s)
Maintainer
Maintainer Email
Update Frequency	Ad-hoc
Preferred Form of Citation	INTERNATIONAL ATOMIC ENERGY AGENCY, [Title]. IN: IAEA Data Platform [online], IAEA, Vienna [YEAR]

Disclaimer

The IAEA makes no warranties, either expressed or implied, concerning the accuracy, completeness, reliability, or suitability of the information. The mention of names of specific companies or equipment does not imply any intention to infringe proprietary rights, nor should it be construed as an endorsement or recommendation on the part of the IAEA.