KIT QUENCH-L0 Bundle Test

QUENCH-L0 was the commissioning test for the QUENCH-L1 bundle experiment with Zircaloy-4 cladding tubes, defined as reference test for the QUENCH-LOCA test series. The overall objective of this bundle test series is the investigation of ballooning, burst and secondary hydrogen uptake of the cladding under representative design-based accident conditions, as well as to check the embrittlement criteria by means of detailed mechanical post-test investigations.

Last Update: 2024-11-27T15:48:59.545699

Dataset Info

KIT QUENCH-L0 Bundle Test

Seguidores: 0

Licencia

IAEA Terms of Use

Openness

0 out of 5

Datos y Recursos

QL0_data_set_online_meas.xlsxXLSX
Start: 22.07.2010 11:30:40 (= -1405 s) Recording rate: 5.0 Hz
Explorar
- Previsualización
- Descargar
QL0_mass_spectr.xlsxXLSX
Explorar
- Previsualización
- Descargar
Report_KIT-SR_7571__Commissioning_QUENCH-L0__Zry4.pdfPDF
Explorar
- Previsualización
- Descargar
QL0_instrumentation.pdfPDF
Explorar
- Previsualización
- Descargar

Campo	Valor
Fuente
Versión	1.0
Author(s)
Mantenedor
Email del Mantenedor
Update Frequency	Ad-hoc
Preferred Form of Citation	INTERNATIONAL ATOMIC ENERGY AGENCY, [Title]. IN: IAEA Data Platform [online], IAEA, Vienna [YEAR]

Disclaimer

The IAEA makes no warranties, either expressed or implied, concerning the accuracy, completeness, reliability, or suitability of the information. The mention of names of specific companies or equipment does not imply any intention to infringe proprietary rights, nor should it be construed as an endorsement or recommendation on the part of the IAEA.